|
Directions:
Surface to be bonded must be free and clean of dirt, grease, oil, wax, moisture and loose particles. Rust, paint or surface oxidation must be removed prior to application.
Coat fin mold with an appropriate release material.
Mix Fin Magic thoroughly 1 part by volume of component A with one part by volume of component B. When bonding, apply mixed adhesive to each surface. Assemble parts and hold them together with low pressure until adhesive is cured. Initial curing occurs in 12 to 15 minutes at room temperature. One to two hours is usually time for quick service although 24 hours is recommended for optimum use. After cure, trim to desired size and shape.
Caution:
Keep Out of Reach of Children.
May cause eye or skin irritation. If contact occurs, wash skin immediately with soap and water. Flush eyes immediately with large amounts of water for 15 minutes and consult physician.
Not to be taken internally.
|