|
Epo-Grip Hide Adhesive is a high strength hide paste designed to save time while providing superior detail results. When applied to the form, the adhesive does not sag, slip, run or shrink. Cures in 3 to 4 hours at room temperature. Once the hide is in position, pinning is not usually required. Can be used with tanned or dry preserved hides, and as a fish hide paste. Will do 2 deer.
Surface Preparation: Remove dirt, grease, oil, wax, moisture, rust and any loose particles.
Application: Thoroughly mix equal parts by volume of parts A and B. Apply mixed compound to each surface and hold together with low pressure until cured. Average cure time requires approximately 24 hours. The use of heat will accelerate the curing process. Epoxy is inert and safe to touch after cure.
Caution:
Keep Out of Reach of Children
Avoid contact with eyes and skin. Wear goggles and protective gloves. Wash with soap and water in case of skin contact. Flush eyes for 15 minutes and see physician.
|