|
Epo-Grip Clear Paste is a clear, two component, fast setting, epoxy paste adhesive which is easily mixed and where initial cure occurs in 6 to 10 minutes at 77 degrees F. Since it contains no solvents, there is no shrinkage; this allows for use where high performance structural bonding is required. Can be shaped and formed with a sharp cutting tool in 15 minutes and finish sanding in approximately 30 minutes.
Use as a fin fixer, fin backer, for installing fins, sealing seams on fish and for gluing artificial heads.
Surface Preparation: Remove dirt, grease, oil, wax, moisture, rust and any loose particles.
Application: Thoroughly mix equal parts by volume of parts A and B until a smooth consistency is obtained. Add tinting powders prior to mixing.
Caution:
Keep Out of Reach of Children
Avoid contact with eyes and skin. Wear goggles and protective gloves. Wash with soap and water in case of skin contact. Flush eyes for 15 minutes and see physician.
Note: Based on reliable testing and evaluation, this product will bond to most substances. Due to the wide range of applications and various conditions used there can be no assurance that this product will always provide 100 per cent results. Use proper surface preparations, mixing and curing methods to achieve proper results.
|